PAST AUCTIONS

NO LONGER NEEDED IN THE CONTINUING OPERATIONS OF ACTIVE PRECISION MANUFACTURING, INC.

BY ORDER OF SECURED PARTY ANDERSON ENVIRONMENTAL & ENGINEERING CO.

MARSHALL MOLD, INC.

.CNC MACHINE SHOP

CONTINENTAL BINDERY, INC.

.

ROBERT E. HUMMEL CONSTRUCTION COMPANY, INC.

No Longer Needed In The Continuing Operations of IMPACT CNC, LLC

No Longer Needed In The Continuing Operations of Designcraft Manufacturing, LLC

V BROTHERS MACHINE CORP.

NO LONGER NEEDED IN THE CONTINUING OPERATIONS OF SHARP METAL PRODUCTS, INC.

.

No Longer Needed In The Continuing Operations of D&M Welding, Inc.

.

DK PRECISION, INC.

.

EXCESS TO THE OPERATIONS OF JEFFREY ELEVATOR COMPANY

Plaspros, Inc. (Batesville, MS Facility Only)

PLASTIC INJECTION MOLDING FACILITY

NO LONGER NEEDED IN THE CONTINUING OPERATIONS OF MODERN ADVANCED MANUFACTURING, INC.

REMOVAL STARTS TUESDAY JULY 5TH AND IS BY APPOINTMENT – CALL SHAWN CURTIS - 815-847-7934 – ALL EQUIPMENT TO BE REMOVED BY FRIDAY, JULY 29TH (CLOSED FRI 7/1 & MON 7/4)

CMB PRINTING, INC.

2-DAY ONLINE AUCTION SALE! BY ORDER OF CHARTER AUTOMOTIVE LLC ELGIN FACILITIES ONLY CHARTER PRECISION LLC

2-DAY AUCTION - DICE MOLD & ENGINEERING, INC.

2-DAY ONLINE AUCTION FEATURING CNC MACHINING CENTERS, CNC EDM'S, RODERS HIGH SPEED MILLS, GRINDERS & BRIDGEPORTS AS LATE AS 2012

No Longer Needed In The Continuing Operations of Action Turbine Repair Service, Inc.

CNC AND MANUAL MACHINE SHOP - VERTICAL MACHINING CENTERS, TURNING CENTERS, HORIZONTAL BORING MILL, ENGINE LATHES, MARVEL SAW, FORKLIFTS, ETC.

EXCESS TO THE CONTINUING OPERATIONS OF PRECISION FORMING & STAMPING CO.

EXCESS TO THE CONTINUING OPERATIONS OF 3D INDUSTRIES, INC.

FEATURING SODICK CNC WIRE EDM'S, RODERS HIGH SPEED MILL, AMADA SAW, GRINDERS, ETC. Inspection and Removal are by appointment. All equipment is to be removed by Friday, May 7th. Contact -- Andy -- 847-331-6630

BY ORDER OF SECURED PARTY - CONCORDE MANUFACTURING & FABRICATION, INC.

FEATURING CNC FABRICATING, CNC TOOL & DIE, STAMPING PRESSES INSPECTION - MARCH 29 & 30, 9AM TO 4PM ALL EQUIPMENT TO BE REMOVED BY FRIDAY, APRIL 16TH, HOURS ARE 9AM TO 5PM

PRINTING DEPARTMENT ONLY - PLJ, INC.

INSPECTION AND REMOVAL ARE BY APPOINTMENT. CONTACT MARK LeVIN 847-884-4975. ALL EQUIPMENT TO BE REMOVED BY FRIDAY, MARCH 19TH.

PRECISE TOOL & MANUFACTURING

PRECISE TOOL & MANUFACTURING

EXCESS TO THE OPERATIONS OF CWI DISPLAYS CORPORATION

DM MANUFACTURING, LLC

BRIERGATE TOOL & ENGINEERING COMPANY

NICHOLAS MACHINE & TOOL, INC.

INSPECTION & REMOVAL ARE BY APPOINTMENT, CONTACT THE OWNER, GENE BEREZA 847-298-2035 ALL EQUIPMENT TO BE REMOVED BY OCTOBER 28TH

UNITED INDUSTRIES OF ILLINOIS, LIMITED

FREY TOOL & ENGINEERING CORP.

CNC MILLING & TURNING AND GENERAL MACHINING -- REMOVAL IS BY APPOINTMENT ALL EQUIPMENT TO BE REMOVED BY FRIDAY, OCTOBER 2 RIGGERS: ATLAS MACHINERY, COLTON BIANCHI 224-639-5201

MD DESIGNS, INC.

INSPECTION BY APPOINTMENT. ALL ITEMS TO BE REMOVED BY FRIDAY, SEPTEMBER 11TH. REMOVAL IS BY APPOINTMENT. CONTACT: STEVE @ 217-747-9605 OR KEVIN @ 217-747-9609

INVENTORY REDUCTION SALE - STANLEY MACHINERY CORPORATION

B&M MACHINE COMPANY - Assets No Longer Required Due To Plant Consolidation

AUCTION CLOSES ON WEDNESDAY, JUNE 17TH. REMOVAL IS BY APPOINTMENT: REMOVAL DATES - THURSDAY, JUNE 18 TO FRIDAY, JULY 3

THE SURPLUS ASSETS OF JDI MOLD AND TOOL, LLC

SALE ENDS WEDNESDAY, MAY 27TH

EXCESS TO SOUTH FLORIDA AEROSPACE MAUNFACTURERS

FEATURING LATE MODEL CNC, HONE, GRINDERS, LATHES, BRUDERER HS PRESSES & MORE

BY ORDER OF SIFFRON, MACHINERY & EQUIPMENT EXCESS TO THEIR CONTINUING OPERATIONS AND REMAINING EQUIPMENT OF FORMER INNOVATIVE FIXTURE SOLUTIONS

CASWARD TOOL WORKS, INC.

CNC TOOL & DIE SHOP / STAMPING & FABRICATING MACHINERY

MACHINERY & EQUIPMENT NO LONGER NEEDED IN THE CONTINUING OPERATIONS OF OBERG MEDICAL XL DIVISION

CNC MACHINE SHOP (6) CHARMILLES WIRE EDM'S * (4) HITACHI SEIKI VMC'S * (6) HARDINGE CNC LATHES

ARCHER ENGINEERING COMPANY

MAZAK CNC TURNING CENTERS, LANDIS THREADERS TO 4" CAP., WARNER & SWASEY TURRET LATHES & MANUAL MACHINE TOOLS

By Order of Secured Party - Chirch Global Manufacturing, LLC

Late Model Amada Turret Punch w/ Loader; Amada Press Brakes; Amada Togu Grinder; Niagara & Verson Straight Side Presses; Minster Piecemaker Straight Side Presses; Cincinnati Shear; Mazak Vertical Machining Center; (2) Agie EDM's; Lagun Mills, Mitsui Grinders; Haeger Hardware Press; Lathe; Welders; Air Compressors; Tool Cabinets & Misc. Tooling and Accessories.

No Longer Needed In The Continuing Operations of PETERSON INTERNATIONAL ENTERPRISE LTD, INC.

FEATURING LATE MODEL HAAS VERTICAL MACHINING CENTERS; HAAS CNC LATHE; MILLING MACHINES; MITUTOYO CMM; AMADA HORIZ. BAND SAW & MORE

EXCESS TO THE CONTINUING OPERATIONS OF 3D INDUSTRIES, INC. 500 FRONTIER WAY BENSENVILLE, ILLINOIS 60106

EXCESS TO THEIR CONTINUING OPERATIONS

ADAM TOOL & MANUFACTURING CO., INC.

EXCESS TO THE CONTINUING OPERATIONS OF BANNER EQUIPMENT CO., INC.

Banner Equipment Company, a U.S. manufacturer of draft beer dispensing equipment, has been supplying the draft beer industry since 1932

DEGRAF CONCRETE CONSTRUCTION, INC.

CONCRETE CONTRACTOR

I.P.M COMPANY

RNW MACHINING CO., INC.

DALE H. LONG SCREW MACHINE PRODUCTS, INC.

.

THUNDER TOOL CORPORATION

THE ALLIED GEAR COMPANY

.

AMCAST, INC.

.

No Longer Needed In The Continuing Operations of Industrial Models, Inc.

.

WOODS MANUFACTURING & MACHINING CO., INC.

.

EXCESS FABRICATING MACHINERY

HAUSERMANN DIE & MACHINE COMPANY

LARGE CNC VERTICAL MACHINING CENTERS & EDM'S

AUTO BODY SHOP

AUTO BODY SHOP

Excess to the Operations of Cadillac Tank & Metal Fabricators, Inc.

FABRICATING MACHINERY & EQUIPMENT

Excess to the Operations of Nosko Manufacturing, Inc.

CNC MACHINE SHOP

REPETE PLASTICS, INC.

CUSTOM PET & PETG SHEET EXTRUDERS

MERIT TOOL ENGINEERING CO., INC.

Inspection - Monday, October 22, 10:30am to 4:00pm

(13) CNC Machines - Excess to a Major Manufacturer

.

FLORIDA PHARMA USA, LLC

.

Due to Relocation - Excess to the Continuing Operations of PIW Corporation

PROVIDER OF FABRICATION & DESIGN SERVICES Featuring LARGE CAPACITY WATERJETS; CNC MILLS; LARGE PINES BENDER; FABRICATION EQUIPMENT & MORE!

FIRST AMERICAN PLASTIC MOLDING ENTERPRISE/QUAD, INC.

- MANUFACTURER OF HIGH QUALITY PLASTIC MOLDED PRODUCTS

CARROLL TOOL & MANUFACTURING, INC.

TOOL & DIE SHOP

Excess to the Operations of Accelerated Machine Design & Engineering, LLC

CNC & MANUAL MACHINE TOOLS

ILLINOIS PUMP REPAIRS, INC.

(2) LARGE LATHES, MANUAL MACHINES & 2005 GMC STAKE BED TRUCK

RUSH MECHANICAL CONTRACTORS, INC.

-

VIKING MACHINE & DESIGN, INC.

---CNC & MANUAL MACHINE SHOP AND FABRICATING EQUIPMENT--- VIDEO TOUR -- (Copy/Paste) https://www.youtube.com/watch?v=YECqxTNyldM **REMOVAL BEGINS ON 3/26 AND CONTINUES THRU 4/13**

SURPLUS TO THE AEROSPACE INDUSTRY

2006 HUFFMAN GRINDER, CNC EQUIPMENT, LATE MODEL SUNNEN HONES, TEST STANDS, LATHES & 1,000 CAT 50 TOOL HOLDERS. FEATURING MORI SEIKI SL-2B TURNING CENTER WITH YASNAC CONTROL, 8 STATION TURRET, TOOLING, CHUCK AND COLLET SETUP MATSUURA RA1 PALLET VERTICAL MACHINING CENTER; W/i-80 Control; X-Axis Travel: 20"; Y-Axis Travel: 15.7"; Z-Axis Travel: 18.1; 550 Table Load Cap.; 6000 RPM Spindle Speed; BT40 Spindle Taper; 5.9" - 24" Spindle Nose to Table Top; 1180 X/Y Axis Rapid Traverses; 945 IPM Z-Axis Rapid Traverse; 3.15"/5.9" Max. Tool Diameter; 11.8" Max. Tool Length; 13.2 Lbs. Max. Tool Weight. SPITFIRE LAPPER MODEL NP17052. EMCO LM800 COMPACT BARFEEDER; W/Bar-Stock Dia. 6-25.5 mm; Bar Stock Length 100-600mm. LNS SPRINT BARFEEDER; W/Bar Stock Dia. Cap. Max. 1-1/4"; Bar Stock Dia. Cap. Min. 1/8"; Hex Bar Cap. Max. 1-1/16"; Hex Bar Cap.1/8"; Square Bar Cap. Max. 13/16"; Square Bar Cap. Min. 1/8"; Bar Length Cap. Max. 12'6"; Overall Length 15'; Weight (Approx.) 3,010 Lbs. GRYPHON TOOL SHARPENER WITH CHUCK AND CABINET. FAIRBANKS MORSE SCALE 1000 LBS MODEL 1124. KALAMAZOO 4 X 36 SANDER ON STAND/ BALDOR MOTOR. INDUSTRIAL CHILLER 5 TON CAPACITY. BARRET CHIP SPINNER WITH AUTO SHUT OFF. FEEDOMATIC LATHE BARFEED SYSTEM ASRP34-3 SERIES. NIKON 14 OPTICAL COMPARATOR WITH STAGING AND SURFACE ILLUMINATION. ROCKWELL PHASE II HARDNESS TESTER. ALAMO SUPPLY MODEL PG-550 PLASMA SPRAY SYSTEM. PARLEC P-260 PRE-SETTER ON TRU STONE BASE WITH CABINET AND COMPUTER. TSUDAKOMA 12 ROTARY TABLE RNCV300R WITH MITSUBISHI CONTROLS, STAND AND JIB. NOBELWEST 660 SERIES MARKING MACHINE. MYFORD 5 X 10 CYL GRINDER WITH WORKHEAD/ TAILSTOCK/ COOLANT. AVANT SUPRA 250 OPTICAL GUAGING SYSTEM, WITH MANUALS. HEAT EXCHANGER TEST STAND FROM HIGH STANDARD WITH ALL COMPONENTS NEW BLOWER. HIGH STANDARD AVIATION FLOW TEST STAND. HIGH STANDARD AVIATION ACTUATOR TEST STAND WITH ACC. AND COMPUTER. PACK-MASTER MANUAL COMPACTOR. POREBA MODEL TR-70C 26"/44" X 196"/39" SLIDING GAP BED FACING LATHE: W/26.7 Swing Over Bed; 44.48" Max. Swing in Gap; 13.1" Center Ht; 16.5" Swing Over Saddle; 13.77" Turning Length In Gap; 19.68" Closed Length; 44.48" Open Length; 23.01 Gap Width; 3.1" Spindle Bore; 5.5 Spindle Dia.; 10-1000 RPM Spindle Speeds; 1/2 - 60 TPI; 1-120 MM/Rev Threads; 220/3-Phase Current Electrical Arrangement; 45 Power Amps; 15HP Main Motor Drive; 39" Face Plate Chuck; Hydraulic Tracer; (2) 4 Watt Tool Posts; Power Rapid Traverse; Coolant Pump Piping (LOCATION - DEERFIELD BEACH, FL). TENNEY ENVIRONMENTAL CHAMBER. MAZAK ACE SERIES 16 X 60 ENGINE LATHE; W/16" Swing; 24" through Gap; 60" Centers; 2.5" Spindle Bore; 39 - 1500 RPM; Hard Ways; Quick Change Tool Post W/Holders (LOCATION - DEERFIELD BEACH, FL). SUNNEN CNC SV-10-D VERTICAL HONE; W/680 Kg Max. Work piece Wt.; 2.25 KW (3HP) Spindle Motor; 0.75 KW (1HP) Stroker; 90-350 RPM Variable Speed. (LOCATION - DEERFIELD BEACH, FL). KAESER 7.5 HP ROTARY SCREW AIR COMPRESSOR; SM-8, W/78 CFM @125 PSI; Oil Injected Rotary Screw End; Control Panel; Full Sound Proof Enclosure; Kaeser Refrigerated Air Dryer (LOCATION - DEERFIELD BEACH, FL) (ASSET #85). MARVEL SERIES 8 VERTICAL BAND SAW. MOORE NO. 3 JIG BORER. WOTAN B-90 TABLE TYPE3.5" HBM; W/3.5" Dia.; Travels: X-49.2", Y-39.3", Z-39.3"; W-31.4"; 43" X 49-1/2" Built-In Rotary Table; #35 Spindle Taper; Digital Readout; Pendant Control; 15-HP Spindle Motor; 43" X 49-12" Built-In Rotary Table (LOCATION - DEERFIELD BEACH, FL). AGIE LEGEND WIRE TYPE ELECTRICAL DISCHARGE MACHINE SUNNEN SV-1010 SINGLE SPINDLE VERTICAL HONING MACHINE (2011). ELB MODEL MICRO-CUT 4 CNC CREEP FEED PROFILE GRINDER (2000) MICRO CUT 4, SIEMENS 840D CNC CONTROL, (LOCATION - DEERFIELD BEACH, FL). MATSUURA MODEL MC800VF VMC WITH i-80 CONTROL; W/45" x 16" Table; Travels: X-31.5"; Y-17.30", Z-19"; Speeds To 8000 RPM; 15HP; BT40; 30-Station ATC; Coolant (LOCATION - DEERFIELD BEACH, FL). HUFFMAN HS-195 5 AXIS GRINDER WITH FANUC 16. (LOCATION - DEERFIELD BEACH, FL) S/N 0977, (2006), GE Fanuc 160i-MB, 18 Position Tool Changer, Smog Hog Dust Collector, HSK63, 16" X Travel, 16" Y Travel, 16" Z Travel, C Axis Rotary, 45 deg - 180 deg, B Axis +15 deg to 108 deg, 15 HP. 1,000 (APPROX.) ASSORTED SIZE & TYPE CAT 50 TOOL HOLDERS (LOCATION - DEERFIELD BEACH, FL).

EXCESS TO THE CONTINUING OPERATIONS OF MR TECHNOLOGIES, INC.

Featuring Heavy Duty Big Bore Engine Lathes

VASSIL MACHINE PRODUCTS, INC.

Featuring 2015 DMG Mori Eco Turn 450 VI CNC Turning Center (only 17 hours); 2011 Mori Seiki Dura Vertical 1035 ECO CNC Machining Center; 2010 Mori Seiki Dura Vertical 5100 CNC Vertical Machining Center; 2007 Monarch VMC QP 2040 CNC Vertical Machining Center; 2006 Monarch VMC-1418 CNC Drill & Tap Center; 2007 DMT G Dalian Model VDL-1000 CNC CNC Vertical Machining Center; (2) Enshu Model E130 CNC Drill & Tap Centers; 2006 Takisawa Model EX 108 CNC Turning Center; 2004 Eurotech Elite Multiplex Series CNC Turning Center; 2002 Eurotech Elite E2 Multiflex Series CNC Turning Center; Okuma Cadet LNC-8 CNC Turning Center; Daewoo Puma 8HC CNC Turning Center; Bridgeport Mills; Etc.

Excess to the Continuing Operations of M&R Precision Machining, Inc.

EXCESS TO THE CONTINUING OPERATIONS OF CAMCRAFT, INC.

JUST ADDED TO SALE!! 2003 & 2002 HYDROMAT MODEL HW25/12 CNC 12-STATION ROTARY TRANSFER MACHINES; CITIZEN CNC SWISS TYPE TURNING CENTERS; TECHNO WASINO CNC DRILL & TAP; MIKRON & TRANSTURN ROTARY TRANFERS; ETC.

Due to the Arrival of New Equipment - Excess to the Continuing Operations of Abbate Screw Products, Inc.

CNC SCREW MACHINES, ACME GRIDLEY MULTIPLE SPINDLE AUTOMATICS, DAVENPORTS, TOOLING & ACCESSORIES, ETC.

Excess to the Operations of LYNTECH ENGINEERING, INC.

(13) TSUGMAI, CITIZEN & STAR SWISS TYPE CNC LATHES

Surplus Assets to the Ongoing Operations of ASSOCIATED MACHINE CO., INC. & Others

Due to Facility Closure - Strategic Solutions & Systems, Inc. and Others

ALL EQUIPMENT MUST BE REMOVED FROM THE PREMISES BY AUGUST 28. NORTHERN MACHINERY SERVICES HAS BEEN SELECTED AS THE EXCLUSIVE RIGGER ON SITE. RIGGING COSTS WILL BE POSTED IN THE BIDSPOTTER LOT CATALOG.

Excess to the Operations of Johnson Bros. Roll Forming Co.

Roll Formers and related equipment

ABBCO, INC.

SHORT NOTICE AUCTION!!-- MANUFACTURERS OF CUSTOM CUTTING TOOLS AND PRECISION COMPONENTS-- DETAILS COMING SOON!

By Order of Secured Party - Process Graphics Corporation d/b/a PG Display

SILK SCREEN / PRINTERS / LAMINATOR / WOODWORKING EQUIPMENT

Excess to the Operations of Rothenberger USA, Inc.

OKAMOTO 12" X 24" MODEL ACCUGAR-124N HYDRAULIC SURFACE GRINDER: S/N 2378; AUTO DOWNFEED; MAGNA-LOCK FLUXMASTER-V VARIABLE HOLDING CONTROL; KANET MAGNETIC CHUCK; COOLANT SYSTEM; MAGNETIC SEPARATOR; WHEEL DRESSER; 1690 RPM; 3.7KW | GALLMEYER & LIVINGSTON GRAND RAPIDS 10" X 30" MODEL NO. 380 HYDRAULIC SURFACE GRINDER: S/N 380196 (1968); WHEEL DRESSER; COOLANT SYSTEM | BOICE CRANE 12"ARM MODEL 1248 RADIAL ARM DRILL: S/N 0469937; 23-1/2" X 18" X 18" T-SLOT BOX TABLE; 52" X 30" T-SLOT BASE; VARIABLE SPEED; 3HP; 875-1750 RPM | HITACHI SEIKI TYPE 2ML-P HORIZONTAL MILL: S/N N-6982; 12" X 59-1/4" T-SLOT TABLE; 33-2000 RPM | (2) CINCINNATI HORIZONTAL MILLING MACHINE: 10" X 41" T-SLOT TABLE; 50-1500 RPM; COOLANT SYSTEM | K.O. LEE MODEL B300 TOOL & CUTTER GRINDER: 1/2HP; 3450 RPM | (2) K.O. LEE MODEL B360 TOOL & CUTTER GRINDER: 1/2HP; 3450 RPM | BURR-KING MODEL SS100E DUST COLLECTOR: S/N SS100E039612 (1996); 1HP | CABINET TYPE DUST COLLECTOR | BURGMASTER HOUDAILLE 6-SPINDLE TURRET TYPE MILLING & DRILLING MACHINE: S/N 4192; 1.5HP; 1725-3450 RPM; 12" X 17" TABLE; AUTO INDEXING | MATTHEWS MODEL 2076 PNEUMATIC MARKING PRESS: S/N J-75; W/ LETTER & NUMBER DIES; 8" X 9" PLATEN | MOJAVE 24" X 18" X 4" BLACK GRANITE SURFACE PLATE W/ PORTABLE CABINET | 24" X 18" X 4" BLACK GRANITE SURFACE PLATE W/ PORTABLE CABINET | 36" X 24-1/4" X 4-1/4" BLACK GRANITE SURFACE PLATE | HAMMOND 6" DOUBLE END CARBIDE GRINDER: S/N 2233; 8" X 14" TABLES; 1/2HP

Excess to the Operations of EMERSON INDUSTRIES, LLC

Featuring Plastic Injection Molders, Stamping and Tool Room

US CONCEPTS, INC. - DUE TO RELOCATION

Excess to the Operations of PETERSON INTERNATIONAL

CNC VERTICAL & HORIZONTAL MACHINING CENTERS - FABRICATING EQUIPMENT & MORE!

GENERAL PRESS COLORS, LTD.

General Press Colors is the leader in the custom manufacturing of flush colors and vehicles

Featuring-18-Mixers; 3-Roll Mills; TCM Forklifts; Bridgeport Mill; Tarnow 21/30 x 120 Lathe; Electric Hoists; Etc.

J.E. HOFFMAN & COMPANY, INC.

CNC Vertical and Horizontal Machining Centers; CNC Turning Centers; Centerless Grinders & More!

EXCESS TO THE ONGOING OPERATIONS OF SIGNMASTERS

M&R PATRIOT 4668 SCREEN PRINTER; ROSENTHAL SLITTER/SCORER; GBC TITAN LAMINATOR; HP DESIGNJET 9000S

BOBCAT 463 SKID STEEER; SKID STEER ATTACHMENTS;  DAEWOO 4000LB. FORKLIFT; HANMECSON 9000LB. AUTO LIFT & MORE!

EXCESS TO THE ONGOING OPERATIONS OF A MAJOR UTAH MACHINE SHOP

MILLPORT CNC LATHE; LATHES TO 240"; LUCAS 4" 50 TAPER BORING MILL; MILLPORT CNC MILL; ACRA MILL MILLING MACHINE

EXCESS TO THE ONGOING OPERATIONS OF RTE ST. CHARLES, INC.

AGIE MODEL 220 CNC WIRE EDM; BRIDGEPORT MILLS; SURFACE GRINDERS; MOORE NO. 3 JIG GRINDER; ETC.

Excess to the Ongoing Operations of Spectrum Graphic Services, Inc

Mitsubishi 6/C, Miehle Roland 4/C & Miller 2/C Presses; Polar Paper Cutter; MBO Folder; Creo Platesetter & More!

Excess to the Ongoing Operations of L.D. Redmer Screw Products, Inc.

2011 Haas TM-1 CNC Mill; Hardinge GT Super Precision; Hardinge CHNC II Plus; Omni Turn G4; SNK Prodigy GT-27; LNS Barfeed

Excess to the ongoing operations of FALSTROM COMPANY, INC.

(3) Cincinnati Press Brakes to 750 Ton & (2) Wiedemann Turret Punches

Moving Sale- Auction of Excess Equipment & Inventory of MSI Studio

HASSELBLAD CAMERAS; SPEEDOTRON EQUIPMENT; MOLE RICHARDSON & MINI MOLE LIGHTS; STANDS; PROPS; APPLE G5'S; OFFICE FURNITURE & MORE!!

SALE #2 - HARIG MANUFACTURING CORPORATION

CNC EDM'S; LEADWELL VMC; DEVLIEG JIGMILL; INTERNAL & CYLINDRICAL GRINDERS; LARGE QUANTITY OF MACHINE ACCESSORIES, TOOLING & INSPECTION EQUIPMENT

THOMAS TOOL CO., INC.

FEATURING - 2004 MILLTRONICS PARTNER 14" X 40" MODEL ML14 CNC LATHE & 2000 OKAMOTO 12" X 24" MODEL ACC12-24ST HYD. SURFACE GRINDER

Inspection – Wednesday, December 16th, 9AM to 4PM; Earlier By Appointment

HARIG MANUFACTURING CORPORATION

Tool & Die and Stamping

S&S MOLD CORPORATION

Equipment as late as 2012

PERFORMANCE MACHINING, LLC

2014 & 2013 Haas CNC Machining Centers & CNC Lathes; Collector Cars; Harley Davidson Motorcycles; Trailers; Etc.

RIGGING - THE OWNER, DAVID KOHLMANN, IS THE EXCLUSIVE RIGGER FOR THE SALE 262-302-0511 OR CELL 262-692-6111.

TRUST MACHINING, INC.

CNC & MANUAL MACHINING, WELDING & FABRICATION